Brand: Yongnuo Digital
Product Code: YN-E3-RT
Warranty: 24 months
Availability: Out Of Stock
189.00 лв.

The YN-E3-RT speedlite transmitter is a direct replacement for the Canon ST-E3-RT and works as a remote wireless controller for ETTL radio controlled speedlites. It can control up to 5 flash groups with 3 flashes per group in full ETTL auto mode and manual mode and has several notable extra features over the Canon counterpart:

  • Adds AF Focus Assist light
  • Retains 2nd curtain sync (in manual mode)
  • Supports 5-group mode with pre-2012 EOS cameras
  • Full sync speed is maintained with pre-2012 EOS cameras
  • Will work with non-Canon cameras (in manual mode)
  • Has USB port for firmware updates

YN-E3-RT Full Feature List:

  • Two-way radio communication in the 2.4GHz range over 100m
  • Fully compatible with Canon 600EX-RT, 600EX-RT II and 430EX-RT III as well as the Yongnuo YN600EX-RT
  • Controls up to 5 groups (A/B/C/D/E) and up to 3 flashes per group (15 lights total)
  • 15 separate radio channels and 1 auto channel; 10,000 customizable photographer IDs
  • Shows group/charge status of slave flashes
  • Has built-in AF assist and sound buzzer
  • Doubles as remote shutter release (shutter cable is included, requires an YN-E3-RX module to trigger)
  • Supports full ETTL features (FEB, FEC, FEL, Modeling Flash, HSS, 1st/2nd Curtain Sync (only in M mode)
  • High-resolution dot-matrix LCD display; backlit display and buttons
  • Fast lock mechanism, dust & water resistance equivalent to EOS-1D series cameras

 Nice to know:

The Yongnuo YN-E3-RT controller is intended to perform and expand the functions of the Canon radio wireless flash control system and if you already own an original Canon flash model 600EX-RT, 600EX-RT II or 430EX III-RT, the YN-E3-RT is the cheapest and most convenient tool to put your lights to best use as off-camera flashes.

However if you are yet at the planning stage of equipping yourself with a set of ETTL-compatible, radio controlled speedlites, you should know that Yongnuo's own TTL remote control system  — the YN622 — offers a very similar feature set at a much lower overall cost due to the cheaper transmitter (YN622C-TX), flashes with built-in receiver (YN685EX/C) and receiver modules for existing flashes (YN622C-II).

Write a review

Note: HTML is not translated!
Related Products


All prices include 20% VAT.